Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Provo?
Most chimney repairs in Provo, UT cost between $250 and $3,500, with the majority of common fixes (crown repairs, cap replacement, and mortar joint work) landing in the $300 to $800 range. Stainless-steel liner replacement for a deteriorated flue typically runs $1,800 to $3,500, while minor flashing and crown sealing often comes in under $400. The written estimate is what sets your final price, and we always put it in writing before any work starts.
Chimney repair isn’t a one-price job. A cracked crown is a different animal from a collapsed flue liner, and the material that fixes one won’t touch the other. Our technicians have up to 15 years of experience diagnosing which problem you actually have, and we carry the industry-grade materials and brand relationships to fix it rather than hand you a referral. We’re licensed and insured, estimates are free, and pricing is always upfront. Call (855) 340-2065 to get started.
Chimney Repair Cost Breakdown (2026)
Here’s what the major repair categories typically run in the Provo market. These are estimated ranges for a typical job. Actual pricing depends on chimney height, material, access, and the extent of the damage.
| Repair Type | Typical Estimated Range |
|---|---|
| Crown repair or rebuild | $300 – $900 |
| Crown rebuild (full replacement) | $500 – $1,200 |
| Mortar joint repair (tuckpointing) | $350 – $800 |
| Chimney cap replacement (Gelco or Famco) | $150 – $450 |
| Flashing repair | $250 – $600 |
| Flue relining (DuraFlex stainless steel) | $1,800 – $3,500 |
| Flue resurfacing (HeatShield ceramic) | $900 – $2,200 |
| Chimney chase cover | $400 – $900 |
| Damper replacement | $300 – $700 |
| Brick spalling repair (partial) | $400 – $1,000 |
| Dryer vent cleaning (add-on) | $120 – $250 |
What pushes a job toward the top of its range? The big drivers are liner condition, chimney height, and whether the repair is interior or exterior. A flue that needs a full stainless reline is going to cost significantly more than a crown patch because it involves the full length of the flue and a custom-fitted DuraFlex system. Exterior work on a taller chimney adds labor and staging. And if the damage has been left unchecked through a freeze cycle, the repair scope grows accordingly.
Where the job sits toward the bottom: a straightforward cap replacement with a Gelco or Famco cover, a small flashing reseal, or a damper swap. These are quick, materials-light jobs and they price that way. If you’re booking a chimney sweep in Provo and damage comes up during the inspection, we can handle the repair in the same visit rather than scheduling a second contractor.
What Affects Chimney Repair Pricing in Provo
Provo has its own set of conditions that drive chimney wear. Most of the housing stock here is wood-burning, and winters swing from warm afternoon stretches to hard overnight freezes. That freeze-thaw cycle is tough on masonry, mortar, and crowns, and it’s the single biggest reason we see cracked crowns and deteriorating joints throughout the valley. Here are the factors that move the price:
- Freeze-thaw damage to masonry. Provo’s winter pattern of daytime melt and overnight freeze expands moisture trapped in brick and mortar, cracking joints and spalling brick faces. The more cycles a chimney has been through without a cap or crown, the more mortar work it needs.
- Chimney height and roof access. A single-story ranch-style home near downtown is easier to reach than a taller two-story on the east bench. Pitch, roof material, and whether the technician can stage safely all affect labor time.
- Liner condition. A cracked clay flue tile calls for relining or resurfacing. We use DuraFlex stainless-steel systems for relining and HeatShield ceramic resurfacing for mortar joint deterioration, so both fix the flue on the spot rather than deferring the work.
- Crown and exterior termination. The crown is your chimney’s roof – it sheds water away from the masonry. A failed crown with an open flue is a direct invite for water and pests. A proper Gelco or Famco cap and a rebuilt crown keep the whole system weather-tight and code-compliant.
- Flashing and roof interface. Where the chimney meets the roof, flashing seals the joint. A compromised flashing is one of the most common sources of hidden water intrusion in Provo homes, and repairing it now prevents much bigger structural problems later.
- Wood-burning vs. gas appliance. Gas inserts typically vent differently than wood-burning fireplaces, and the liner and cap requirements change with them. Liner sizing and material selection for a gas appliance differ from an open wood-burning flue.
How to Save on Chimney Repair
The most reliable way to keep a repair bill down is to catch the damage before the freeze-thaw cycle turns a small crack into a rebuild. A cracked crown that gets sealed in the fall stays a crown seal; left through a Provo winter, it can loosen the masonry below it and turn into a much bigger job.
- Book a fall inspection before the first freeze. A sweep and inspection combo lets us identify damaged mortar joints, a failing crown, or a compromised liner while the fix is still minor. We use those visits to document the whole flue so you have a clear picture before winter.
- Pair chimney and dryer vent service. Because we handle chimney repair and dryer vent cleaning as separate but related lines, one appointment can address two fire-safety concerns. Dryer vent blockages are one of the leading causes of residential structure fires according to NFPA data, so combining the two visits keeps the price efficient.
- Get the estimate free and in writing. We don’t charge for a service call or diagnostic. The estimate is free and the price is set per job by the written estimate – no surprises.
- Fix the flue while the technicians are already there. When a sweep turns up a deteriorated flue, HeatShield resurfacing or DuraFlex relining can be done on the spot, saving you the labor and scheduling hassle of a second contractor visit.
- Don’t defer the crown. Crown repair is one of the cheapest line items on the list, and a working crown protects the most expensive part of the system – the liner and the masonry above the roof line. Call (855) 340-2065 for a free estimate.
Do You Need Chimney Repair or Replacement in Provo?
For most Provo homeowners, repair is significantly cheaper than rebuilding or replacing the entire chimney, and it’s usually the right call when the structure is otherwise sound. Full chimney rebuilds are typically reserved for cases where the masonry above the roof line has lost structural integrity or where there are code-compliance failures that can’t be corrected through relining and resurfacing. For more about the Provo service area and how we handle it, our team can walk you through it.
Here’s how we make the call: if the brick and mortar are structurally intact, a stainless reline or a HeatShield resurfacing solves the flue problem at a fraction of rebuild cost. If the crown is failing but the masonry below is solid, we rebuild the crown and cap the top. The rebuild case is when the masonry itself has moved or the chimney is separating from the house – and even then, the written estimate tells you exactly what’s involved before any work begins.
How Long Does Chimney Repair Take in Provo?
Smaller repairs like a cap replacement, damper swap, or flashing reseal typically take a single visit of a few hours. A HeatShield resurfacing job takes most of a day. A full DuraFlex stainless-steel reline on a standard chimney takes one to two days depending on height and access. Larger crown or masonry rebuilds can span multiple days.
Because we clean, inspect, and repair within the same visit, we’re not in the position of looking at a problem and then telling you to call another company. The technicians arrive equipped for the repair work they find. Call (855) 340-2065. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Choose Us for Chimney Repair in Provo
We’re a full-service chimney and ventilation specialist, which means we handle sweeping, repair, and dryer vent work with equal technical depth. The brands we work with reflect that: DuraFlex for stainless-steel relining, HeatShield for ceramic flue resurfacing, Olympia Chimney and Copperfield for supply components, and Gelco and Famco for caps and venting covers. Those aren’t catalog names to us – they’re the systems we install when a flue needs a proper fix, not a patch.
Our technicians have up to 15 years of experience with the range of repairs Provo homes need, from small crown work to full flue relining. We’re licensed and insured, estimates are free, and we always put the price in writing before we begin. If a home inspection or insurance review flagged your chimney, we can diagnose and repair in the same visit and document what was done.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Provo, UT?
Chimney repair in Provo typically ranges from $250 to $3,500 depending on the repair type, with most common fixes landing between $300 and $800. A cap replacement or small flashing reseal is often under $450, while a full DuraFlex stainless-steel reline is typically $1,800 to $3,500. Call (855) 340-2065 for an exact quote; estimates are free.
Is it cheaper to repair or replace a chimney in Provo?
Repair is almost always cheaper than replacing the full chimney, and it’s usually the right choice when the masonry above the roof line is still sound. A reline or resurface is a fraction of rebuild cost. Call (855) 340-2065 to get a written estimate that compares your actual options.
How much does flue relining cost in Provo?
Flue relining with a DuraFlex stainless-steel system in Provo typically runs $1,800 to $3,500, depending on chimney height and flue dimensions. HeatShield ceramic resurfacing for less-severe mortar deterioration typically runs $900 to $2,200. Call (855) 340-2065 for a free, written estimate.
Can you fix my chimney in a single visit?
Most common repairs – crown repair, cap replacement, flashing reseal, small mortar work, and damper swaps – are completed in a single visit. Flue relining and HeatShield resurfacing take one to two days. We’ll tell you upfront how long your job will take when we give the estimate. Call (855) 340-2065.
Does a chimney repair estimate cost anything?
No. Our estimates are free and there’s no service-call or diagnostic fee. The written estimate sets the final price, and it’s given before any work starts. Call (855) 340-2065 – we answer 24/7, fast dispatch from 7am to 7pm, Sunday through Friday.
Is chimney repair covered by insurance?
Coverage varies by policy and by the cause of the damage. Weather-related damage and damage from a sudden event are more often covered; deferred maintenance and freeze-thaw cracking are usually treated as homeowner responsibility. We can work with your insurer and provide documentation of what we find. Call (855) 340-2065 to schedule a diagnostic visit.
Get a Free Chimney Repair Estimate in Provo
If you’ve noticed a cracked crown, deteriorating mortar, a loose cap, or a flue that’s been flagged during a home inspection, it’s worth getting the repair scoped before Provo’s next freeze. We offer free estimates, we work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield systems, and we’ll give you a clear written price before any work starts. Call (855) 340-2065.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Provo market as of 2026. Chimney Sweep Provo offers free estimates – call (855) 340-2065.
Written by the team at Chimney Sweep Provo.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Dina Mansour"Honest people. That's getting rare."
- Kelly Gallagher"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Nicole Parker