Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Heber, UT
Chimney repair in Heber, UT is a different job than it is in the valley below. At roughly 5,500 feet in the Heber Valley, wood heat isn’t decoration here; it’s how a lot of homes stay warm through a long winter, which means flues take a sustained beating and masonry gets worked hard by freeze-thaw cycles. We handle the repair work that follows: relining older farmhouse flues, resurfacing cracked mortar joints, resetting caps and crowns that snow load has pushed out of shape. Call (855) 340-2065 and we’ll set up a free estimate.
Why Heber Homes Are Different
Heber’s chimney stock splits cleanly in two, and each half fails in its own way. The original valley farmhouses and ranches carry masonry chimneys that have been through decades of hard burning; their flues are often cracked, spalling, or lined with clay tile that has shifted. The newer subdivisions, many of them second homes or full-time homes, run factory-built metal chimney systems instead. Those need manufacturer-specific sweeping and correct components, not generic hardware-store parts.
The climate does the rest. Winters here are long and cold with real snow, and having a fireplace on heavy rotation for months builds creosote faster than occasional weekend burning does. Sudden freeze-thaw cycles and snow load go after chimney caps and exterior masonry specifically, which is why cap and crown damage shows up so often on Heber roofs. The season compresses too: homeowners book sweeps in September and October before the first serious snow, and heavily used stoves often get a second mid-winter sweep.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Heber Services
Most Heber homeowners call us about one of two things: getting the flue cleaned and inspected before burning season, or getting the dryer vent cleared as part of the same whole-home ventilation check.
Chimney Sweep in Heber
In Heber, a sweep is a creosote job. Long winters and sustained wood burning mean the flue loads up faster than it would in a milder climate, and it needs to come out before the fall rush fills the calendar. We brush the flue for the system that’s actually there, whether that’s a masonry chimney in an older ranch house or a factory-built metal system in a newer subdivision, then run a camera and show you what we found. If you want the full walkthrough of how we handle this locally, see Chimney Sweep in Heber.
Dryer Vent Cleaning in Heber
Dryer vents are the other half of home ventilation safety, and they clog faster than most people expect. Lint builds up in the run and around the termination, airflow drops, and the dryer works hotter and longer than it should. In Heber’s tight, well-sealed homes, a restricted vent also pushes moisture back into the house. We clear the full run and check the exterior termination, which matters here because snow and ice can block a vent cover at the wrong time of year. The details are on our Dryer Vent Cleaning in Heber page.
Chimney Repair in Heber
Heber’s repair work follows the housing stock. Masonry chimneys in the valley’s older farmhouses and ranches turn up cracked flue tiles, deteriorated mortar joints, and crowns that have opened up over many freeze-thaw cycles. The newer factory-built systems in Heber’s subdivisions tend to need correct caps, flashing, and manufacturer-matched components rather than masonry work. Our Chimney Repair work covers both, and we don’t just flag a problem and hand you a referral – we fix it with industry-grade materials, then leave you with camera evidence of what we found and what we did.
Chimney Cap Installation
Signs you need it
You’re seeing water stains on the firebox or smoke shelf, birds or debris in the flue, or an open, unprotected top on a chimney that’s handling snow load and freeze-thaw every winter.
What it costs in Heber
Cap installation typically runs about $250 to $550 depending on the flue size, cap style, and whether the existing crown needs attention first.
How we do it
We measure the flue opening, fit a Gelco or Famco cap sized to the termination, secure it against wind and snow movement, and confirm the whole assembly is weather-tight and code-compliant.
Chimney Liner Installation
Signs you need it
Camera inspection shows cracked, spalling, or offset clay tiles, or a flue with no liner at all behind an appliance that requires one.
What it costs in Heber
Liner installation usually falls in the $2,200 to $5,500 range, set by flue height, liner diameter, and whether insulation and a new top plate are needed.
How we do it
We size and insulate a DuraFlex stainless-steel liner to the appliance, pull it through the existing flue, connect it at the top plate and appliance collar, and verify the draft with a camera pass.
What Chimney Repair Costs in Heber
Repair pricing in Heber moves with flue height, how much of the masonry has to come apart, and whether snow load or freeze-thaw damage has spread to the crown and flashing. Every figure below is an estimate; the written estimate we hand you sets the final price.
| Item | Typical range in Heber |
|---|---|
| Chimney cap installation | $250 – $550 |
| Chimney cap replacement | $300 – $650 |
| Chimney liner installation | $2,200 – $5,500 |
Do I really need a new liner, or can it be patched?
It depends on what the camera shows. Hairline cracks in mortar joints can often be resurfaced with HeatShield ceramic repair rather than replaced; cracked or missing flue tiles usually call for a full DuraFlex liner. We show you the footage and say plainly when a repair can safely wait.
Can chimney repair in Heber wait until spring?
Sometimes yes. Water intrusion through a bad cap or crown gets worse with every freeze-thaw cycle, so those are worth handling before winter sets in. A deteriorated flue behind a stove you’re actively burning shouldn’t wait at all. Call (855) 340-2065 for an exact quote – estimates are free.
Brands We Service in Heber
We work with professional-grade product lines rather than commodity parts: DuraFlex stainless-steel liners, HeatShield ceramic resurfacing, and Gelco caps and venting components, sourced through Copperfield and Olympia Chimney. You can review the full list on our brands page. Component turnaround varies by system, and we’ll confirm timing in your written estimate.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Heber, UT
Heber’s long, cold winters and heavy wood use mean more creosote and more exterior wear than lower-elevation towns see, and that shows up in the scope of the work. Here’s what the common jobs typically run. We agree a flat price before we book, and the written estimate is the number that stands.
| Service | Typical range in Heber |
|---|---|
| Chimney sweep (standard flue) | $180 – $340 |
| Camera inspection and photo report | $120 – $250 |
| Chimney cap installation | $250 – $550 |
| Chimney cap replacement | $300 – $650 |
| Chimney liner installation | $2,200 – $5,500 |
| HeatShield resurfacing (mortar joints) | $700 – $1,800 |
| Chimney crown repair | $400 – $1,200 |
| Chimney flashing repair | $350 – $900 |
| Dryer vent cleaning | $120 – $250 |
Two things push Heber pricing up: flue height and roof access on steep-pitch homes, and how far freeze-thaw damage has spread from the crown into the flashing and masonry. Nothing gets recommended without camera evidence, so you can see the reason for the price yourself.
Neighborhoods We Serve in Heber
We cover Heber and the surrounding valley, from the older farmhouse properties along the valley floor to the newer subdivisions filling in around town. Response across the Heber area is generally quick, and we’ll give you a realistic window when you book rather than a number we can’t hold to.
- Downtown Heber and the older farmhouse blocks
- Heber Valley subdivisions on the north side of town
- Properties along the valley floor toward Midway
- Outlying ranch and acreage homes in the surrounding valley
Service Area – Cities Near Heber
Heber sits in the middle of a service area that runs down the valley and over toward Utah Valley. We also take work in Midway, UT just across the valley, and down through Orem, UT and Provo, UT. Farther south, Springville, UT is on the route as well. If you’re outside Heber and want to know whether you’re covered, call and we’ll tell you straight.
Serving Heber, UT – Our Local Coverage Area
We serve Heber and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Heber
Heber is a regular part of our route, and scheduling is usually within a few days outside the September and October rush. Call (855) 340-2065. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Some repairs do and some don’t, and it depends on scope and on your local building department’s rules. Relining and structural masonry work more often require one than a cap swap. We’ll tell you what your job typically needs before we start.
Yes. Heber’s older masonry chimneys and the factory-built metal systems in newer subdivisions need different approaches and different components, and we carry the brand lines for both. One call covers inspection, repair, and dryer vent cleaning across the valley.
If your flue needs attention before the next hard freeze, call (855) 340-2065 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 15 years of experience.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Heber Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Rachel Ziegler"Showed up when they said they would. That's most of the battle."
- Marco Mendoza"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Alejandro Castillo