Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Midway, UT
Chimney repair in Midway usually starts with the same two culprits: an early-1900s brick stack with an undersized or spalling clay liner, or a 1970s chalet chimney with a cracked crown and a cap that stopped keeping birds out years ago. Sitting at roughly 5,600 feet in the Heber Valley, Midway homes run their fireplaces almost daily for six months, and the freeze-thaw cycle between October and April works masonry harder than most homeowners expect. We clean, inspect, and repair in a single visit where the job allows, using industry-grade materials. Call (855) 340-2065. We answer 24/7.
Why Midway Homes Are Different
The first thing that separates Midway from a valley-floor town is the inversion. Cold air settles against the Wasatch foothills in winter and traps wood smoke low, which means a dirty flue here isn’t only a house problem. It’s a neighborhood air-quality problem. Many Midway homes burn wood as a primary heat source through long winters, and the creosote that comes with that volume of burning builds faster than it does in a house that lights a fire a few evenings a year.
The housing stock splits cleanly in two, and each half fails differently. Early-1900s farmhouses around the valley center carry original brick chimneys with clay tile liners that are often undersized for a modern insert, and the tile spalls after enough hard freezes. The 1970s through 1990s chalet-style second homes tend to have factory-built metal fireplaces and exterior stainless chimneys. Those need poly brushes and a camera to confirm there’s no creosote glazing, because a metal flue hides its condition from the outside. A sudden thaw can crack a masonry crown and let meltwater run straight into the flue before anyone notices.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Midway Services
Two services account for most of the calls we take in Midway, and they tend to arrive together: a sweep that turns up damage, and a dryer vent that hasn’t been opened in years.
Chimney Sweep in Midway
A sweep in Midway is rarely a five-minute brush-and-go. On the chalet-style homes off Snake Creek Drive, technicians routinely find the same 1970s factory-built chimney carrying a cracked crown from frost heave, a bird’s nest packed into the cap, and stage-3 creosote from burning unseasoned local pine, all before the first snow. We match the brush to the flue: poly for factory-built metal, traditional for masonry. Every visit includes a camera inspection and a photo report, so you see what we see. Book a chimney sweep before burning season starts.

Dryer Vent Cleaning in Midway
Lint packed into a dryer duct is one of the leading causes of residential structure fires, and it’s the service Midway homeowners most often forget until a home inspection flags it. In a house that runs the dryer hard through a long winter, a duct that climbs through a cold exterior wall can collect lint and shed condensation at the same time. We clear the full run, confirm the exterior termination opens and closes properly, and check that a Famco or Gelco vent cover is doing its job. See our dryer vent cleaning page for the full scope.

Chimney Repair in Midway
Chimney repair in Midway is shaped by the valley’s two housing eras and the six-month burn season between them. An early-1900s brick chimney with an original clay liner is a very different repair from a chalet’s exterior stainless flue, and the freeze-thaw cycle at this elevation finds the weak point in both. We don’t just flag problems during an inspection. We fix them, in many cases on the same visit, using Chimney Repair materials specified for the job rather than hardware-store substitutes.
Chimney Crown Repair
Signs you need it
A visible crack across the mortar cap, a crown pulling away from the flue, or water staining on the firebox ceiling after a thaw are the usual tells.
What it costs in Midway
Chimney crown repair in Midway typically runs $300 to $700, and the written estimate sets the final price.
How we do it
We chip out the failed crown, rebuild the overhang with a proper slope away from the flue, and seal the joint so meltwater sheds instead of seeping.
Chimney Liner Installation
Signs you need it
Spalling clay tile, a liner visibly undersized for the appliance, or a camera showing gaps between tile sections all point to relining.
What it costs in Midway
Liner installation in Midway typically falls between $1,800 and $4,500 depending on flue height, liner type, and whether an insert is involved.
How we do it
We measure and camera the flue, then install a DuraFlex stainless-steel liner sized to the appliance and insulate it to protect against the cold exterior chase.
What Chimney Repair Costs in Midway
These are typical ranges for the Midway market. The written estimate you get before any work begins is the number that counts.
| Item | Typical range in Midway |
|---|---|
| Chimney crown repair | $300 – $700 |
| Chimney cap installation | $150 – $450 |
| Chimney liner installation | $1,800 – $4,500 |
Do I really need a new liner, or can the old one be resurfaced?
Sometimes the old one can be resurfaced. We use the HeatShield ceramic system for cracked or deteriorating mortar joints, an EPA-recognized repair method, and only recommend a full liner when the camera shows damage that resurfacing can’t correct.
How soon should a cracked crown be repaired in Midway?
Before the next hard freeze if possible. A cracked crown lets meltwater into the flue during spring thaws, and repeated freeze-thaw cycles widen the crack each winter.
Brands We Service in Midway
We work with a curated roster of professional-grade brands: DuraFlex stainless liners, HeatShield ceramic resurfacing, and caps and venting components from Gelco, Famco, and Olympia Chimney. Sourcing through Olympia Chimney and Copperfield keeps turnaround predictable on most repairs. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Midway, UT
| Service | Typical range in Midway |
|---|---|
| Chimney sweep and inspection | $150 – $350 |
| Dryer vent cleaning | $120 – $250 |
| Chimney cap installation | $150 – $450 |
| Chimney crown repair | $300 – $700 |
| Chimney flashing repair | $250 – $650 |
| Chimney liner installation | $1,800 – $4,500 |
What pushes price up in Midway is flue height on the taller chalet chimneys, exterior stainless chases that take longer to access, and any liner work that requires scaffolding on a steep roofline. The price is set per job by the written estimate, agreed before we start.
Neighborhoods We Serve in Midway
We cover the whole of Midway and the surrounding Heber Valley, from the older farmhouse blocks near the valley center out to the chalet clusters climbing toward the foothills. Homes in the 84049 area are all within our regular routes, and dispatch across Midway is typically quick given how compact the valley is.
- Snake Creek Drive
- Valley center farmhouse blocks
- Chalet clusters along the Wasatch foothills
- Homestead area
Service Area – Cities Near Midway
Midway sits close to several valley communities we work in regularly. If you’re just outside the city limits, we likely cover you too. We serve Heber, UT, Orem, UT, Provo, UT, and Springville, UT, along with the surrounding Wasatch and Utah County areas. Call (855) 340-2065 to confirm coverage for your address.
Serving Midway, UT – Our Local Coverage Area
We serve Midway and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Midway
Midway is a regular stop on our routes, so dispatch is usually quick. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
Most chimney repairs don’t require a permit, but a full reline or structural crown rebuild may. Check with Midway City before work starts, and review any HOA rules if your chalet sits in a managed community.
Yes. We cover all of Midway and the surrounding Heber Valley, including the 84049 area and nearby communities. Call (855) 340-2065 to confirm your address is on our route.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Midway Customers Say
"Showed up when they said they would. That's most of the battle."
- Marco Mendoza"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Elena Guzman"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Neil Ackerman